Complete Package includes 3 Machined Bronze Fixtures each with 2m of Rubber Power Cable and
Clear Tempered Glass Window, Thermoplastic Mounting Brackets with Brass Screws and Series 300
Stainless Steel Hardware, 2 or 3- 75W MR-16 Clear Halogen Bulbs, Potted Junction Box with remote
transformer, and Rubber Stub Cord with Quick Disconnect and Strain Relief.
Machined Bronze Fixture
Built In Thermal Overload Protection on Each Fixture
Built In Triple O-Ring Sealing on Each Fixture
Molded Junction Box with Heyco Connectors and Potted for Leak Prevention
Requires Only 2.5cm Submersion of Light Base
Bronze Construction of Exposed Metal; Salt Water Compatible
2 Year Warranty
Energy Efficient, Low Voltage Lighting
Industrial Strength Design
Above Water Lens Position for Greater Light Penetration
Flex Sleeve Cord Protection
3 Machined Bronze Fixtures with Thermoplastic Mounting Bracket, Brass Screws, and Series 300 Stainless Steel Hardware
Three 75W Clear MR-16 Halogen Bulbs
Sealed, potted junction box with two 75W lighting transformers with built in overtemp, overload, and short circuit protection with automatic reset
Suggested for 4400, 8400, 2-30,3-10, 3-30 Models
Yellow, Green, Blue, and Red Coloured 50W Bulb Options
The remote lighting transformer takes in 208-240V and produces 12V power to illuminate the MR-16 halogen bulbs.
Light passes through the clear, tempered glass lens that is positioned above the water level and onto the fountain pattern.
Can be used with timer or photocell to control operation in conjunction with the fountain.
Max Water Temp of 35°C
For Use in Non-Explosive Areas Only
Do Not Operate Out of Water
Discontinue use and remove when water is below 0°C.
RCD (residual current device) or GFCI (ground fault circuit interrupter) protected circuit required