Manifolds are used to split a single supply of water to multiple outlets. This allows you to attach solenoids which feed zones which is controlled by the controller. The VDL manifold is made up of 32mm VDL plastic fittings all glued and tested prior to posting. As each manifold is made for each job the water connection and drain valves can be located where required. Any size can be made if you are limited on space etc. Connection is made with onto a 3/4 " fitting, the manifold has a non return valve has standard and a 1" Drain Valve.The connection onto the solenoid is 3/4".
The Manifold has no solenoids attached or cables but can be assembled.
The picture shows the manifold located within a wooden box and the controller located above.
All Solenoids and fittings are not included in the price and should be added to the shopping cart separately.