K-Rain RPS 469 Outdoor Controller

• 4, 6 & 9 Station Models – Perfect for residential & light commercial applications.


• 6 Fully Independent Programs – Allowing up to 6 starts per program.  Maximum 36 starts per day.


• Indoor or Outdoor installation.


• Water Conservative – Allows for quick adjustment of watering durations in 10% increments, from 10% to 200%.


• Rain Sensor Ready – Accepts rain sensor and allows individual stations to be set and controlled by the sensor.


• Flexible Manual Operation – Automatic, semi-automatic, and single station manual.


• System Test – Allows a full system check for valve operation.


• Permanent Memory – Saves programs during power outages.


• Weatherproof Enclosure – Ensures long product life.

• Dimensions: Height 8.8” Width 7.9” Depth 2.9”


• Station Run Times - 1 min. to 12 hours 59 min.


• Programs -  6


• Start Times – 6 per program


• Watering Schedule – 7 day calendar with individual day selection, or 1 to 15 day interval watering, or 365 day calendar for ODD/EVEN day or interval watering.


• Rain Sensor Ready – Inhibits automatic watering when wet conditions are detected by a suitable rain sensor.


• Master valve/Pump can be enabled or disabled by station or by program.


• Automatic, semi automatic & single station manual operation.


• Capable of programming remotely using a standard 9 volt alkaline battery.  Permanent memory saves programs during power outages.

Electrical Specifications:

• Electrical Power Supply – 100 – 120 VAC/60Hz/230 VAC/50Hz


• Electrical Outputs – 24 Volt AC, 1.0 AMP


• To Solenoid Valve – 24 VAC 50/60 Hz 0.75 AMPS max.  NOTE: Up to 3 valves per station on inbuilt model.


• Total output load not to be exceeded by the valves and pump start requirements.


• Overload protection: Standard 20mm 1.0 AMP fuse


• Power Failure – 9 volt standard alkaline battery permanently maintains clock and program.


• Power Failure – The controller has permanent memory so the data is always backed up even during power outages.